Maintenance for Oil Models Made Since 2012

For help calibrating or storing your Smart Leveler, see our Quick Start Guide.

 

Removing Air Bubbles

Bleed the display :

  1. Hold the display lower than the reservoir with the tubing pointed down.
  2. Back the brass hex plug out until all the air bleeds out, then retighten the plug.
  3. If the air bubble is closer to the reservoir, hold the tubing so the air travels into the reservoir. You may have to shake the reservoir for the air to pass through the black adapter where the tubing connects to the reservoir.

 

 

If your problem persists, please contact us.